Cisco WS-C3560E-48PD-SF Command Reference - Page 45

Chapter 2 Catalyst 3560 Switch Cisco IOS Commands archive upload-sw archive upload-sw Use the archive upload-sw privileged EXEC command to upload an existing switch image to a server. archive upload-sw [/version version_string] destination-url Syntax Description /version version_string destination-url (Optional) Specify the specific version string of the image to be uploaded. The destination URL alias for a local or network file system. These options are supported: • The syntax for the local flash file system: flash: • The syntax for the FTP: ftp:[[//username[:password]@location]/directory]/image-name.tar • The syntax for an HTTP server: http://[[username:password]@]{hostname | host-ip}[/directory]/image-name.tar • The syntax for a secure HTTP server: https://[[username:password]@]{hostname | host-ip}[/directory]/image-name.tar • The syntax for the Remote Copy Protocol (RCP): rcp:[[//username@location]/directory]/image-name.tar • The syntax for the TFTP: tftp:[[//location]/directory]/image-name.tar The image-name.tar is the name of software image to be stored on the server. Defaults Uploads the currently running image from the flash: file system. Command Modes Privileged EXEC Command History Release 12.1(19)EA1 Modification This command was introduced. Usage Guidelines Use the upload feature only if the HTML files associated with the embedded device manager have been installed with the existing image. The files are uploaded in this sequence: the Cisco IOS image, the HTML files, and info. After these files are uploaded, the software creates the tar file. Image names are case sensitive. 78-16405-05 Catalyst 3560 Switch Command Reference 2-13