Cisco WS-C3560E-48PD-SF Command Reference - Page 796

debug platform fallback-bridging Appendix B Catalyst 3560 Switch Debug Commands debug platform fallback-bridging Use the debug platform fallback-bridging privileged EXEC command to enable debugging of the platform-dependent fallback bridging manager. Use the no form of this command to disable debugging. debug platform fallback-bridging [error | retry | rpc {events | messages}] no debug platform fallback-bridging [error | retry | rpc {events | messages}] Syntax Description error retry rpc {events | messages} (Optional) Display fallback bridging manager error condition messages. (Optional) Display fallback bridging manager retry messages. (Optional) Display fallback bridging debugging information. The keywords have these meanings: • events-Display remote procedure call (RPC) events. • messages-Display RPC messages. Defaults Debugging is disabled. Command Modes Privileged EXEC Command History Release 12.1(19)EA1 Modification This command was introduced. Usage Guidelines If you do not specify a keyword, all fallback bridging manager debug messages appear. The undebug platform fallback-bridging command is the same as the no debug platform fallback-bridging command. Related Commands Command show debugging Description Displays information about the types of debugging that are enabled. For syntax information, select Cisco IOS Release 12.2 Configuration Guides and Command References > Cisco IOS Configuration Fundamentals Configuration Guide, Release 12.2 > System Management > Troubleshooting and Fault Management. B-36 Catalyst 3560 Switch Command Reference 78-16405-05