Cisco WS-C3560E-48PD-SF Command Reference - Page 488

show lacp Chapter 2 Catalyst 3560 Switch Cisco IOS Commands This is an example of output from the show lacp neighbor command: Switch> show lacp neighbor Flags: S - Device is sending Slow LACPDUs F - Device is sending Fast LACPDUs A - Device is in Active mode P - Device is in Passive mode Channel group 3 neighbors Partner's information: Port Gi0/1 Partner Partner System ID Port Number 32768,0007.eb49.5e80 0xC Age 19s Partner Flags SP LACP Partner Port Priority 32768 Partner Oper Key 0x3 Partner Port State 0x3C Partner's information: Port Gi0/2 Partner Partner System ID Port Number 32768,0007.eb49.5e80 0xD Age 15s Partner Flags SP LACP Partner Port Priority 32768 Partner Oper Key 0x3 Partner Port State 0x3C This is an example of output from the show lacp sys-id command: Switch> show lacp sys-id 32765,0002.4b29.3a00 The system identification is made up of the system priority and the system MAC address. The first two bytes are the system priority, and the last six bytes are the globally administered individual MAC address associated to the system. Related Commands Command clear lacp lacp port-priority lacp system-priority Description Clears the LACP channel-group information. Configures the LACP port priority. Configures the LACP system priority. 2-456 Catalyst 3560 Switch Command Reference 78-16405-05