Cisco WS-C3560E-48PD-SF Command Reference - Page 334
show policy-map, police, trust, policed-dscp, class, class-map, mls qos map, policy-map
View all Cisco WS-C3560E-48PD-SF manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 334 highlights
police Chapter 2 Catalyst 3560 Switch Cisco IOS Commands Examples This example shows how to configure a policer that drops packets if traffic exceeds 1 Mbps average rate with a burst size of 20 KB. The DSCPs of incoming packets are trusted, and there is no packet modification. Switch(config)# policy-map policy1 Switch(config-pmap)# class class1 Switch(config-pmap-c)# trust dscp Switch(config-pmap-c)# police 1000000 20000 exceed-action drop Switch(config-pmap-c)# exit This example shows how to configure a policer, which marks down the DSCP values with the values defined in policed-DSCP map and sends the packet: Switch(config)# policy-map policy2 Switch(config-pmap)# class class2 Switch(config-pmap-c)# police 1000000 20000 exceed-action policed-dscp-transmit Switch(config-pmap-c)# exit You can verify your settings by entering the show policy-map privileged EXEC command. Related Commands Command class mls qos map policed-dscp policy-map set show policy-map trust Description Defines a traffic classification match criteria (through the police, set, and trust policy-map class configuration commands) for the specified class-map name. Applies a policed-DSCP map to a DSCP-trusted port. Creates or modifies a policy map that can be attached to multiple ports to specify a service policy. Classifies IP traffic by setting a DSCP or IP-precedence value in the packet. Displays quality of service (QoS) policy maps. Defines a trust state for traffic classified through the class policy-map configuration or the class-map global configuration command. 2-302 Catalyst 3560 Switch Command Reference 78-16405-05