Cisco WS-C3560E-48PD-SF Command Reference - Page 42

archive tar Chapter 2 Catalyst 3560 Switch Cisco IOS Commands archive tar Use the archive tar privileged EXEC command to create a tar file, list files in a tar file, or extract the files from a tar file. archive tar {/create destination-url flash:/file-url} | {/table source-url} | {/xtract source-url flash:/file-url [dir/file...]} Syntax Description /create destination-url flash:/file-url Create a new tar file on the local or network file system. For destination-url, specify the destination URL alias for the local or network file system and the name of the tar file to create. These options are supported: • The syntax for the local flash filesystem: flash: • The syntax for the FTP: ftp:[[//username[:password]@location]/directory]/tar-filename.tar • The syntax for an HTTP server: http://[[username:password]@]{hostname | host-ip}[/directory]/image-name.tar • The syntax for a secure HTTP server: https://[[username:password]@]{hostname | host-ip}[/directory]/image-name.tar • The syntax for the Remote Copy Protocol (RCP) is: rcp:[[//username@location]/directory]/tar-filename.tar • The syntax for the TFTP: tftp:[[//location]/directory]/tar-filename.tar The tar-filename.tar is the tar file to be created. For flash:/file-url, specify the location on the local flash file system from which the new tar file is created. An optional list of files or directories within the source directory can be specified to write to the new tar file. If none are specified, all files and directories at this level are written to the newly created tar file. 2-10 Catalyst 3560 Switch Command Reference 78-16405-05