Cisco WS-C3560E-48PD-SF Command Reference - Page 436

show interfaces Chapter 2 Catalyst 3560 Switch Cisco IOS Commands This is an example of output from the show interfaces capabilities command for an interface. Switch# show interfaces gigabitethernet0/2 capabilities GigabitEthernet0/2 Model: WS-C3560-24PS Type: 10/100/1000BaseTX Speed: 10,100,1000,auto Duplex: full,auto Trunk encap. type: 802.1Q,ISL Trunk mode: on,off,desirable,nonegotiate Channel: yes Broadcast suppression: percentage(0-100) Flowcontrol: rx-(off,on,desired),tx-(none) Fast Start: yes QoS scheduling: rx-(not configurable on per port basis),tx-(4q2t) CoS rewrite: yes ToS rewrite: yes UDLD: yes Inline power: no SPAN: source/destination PortSecure: yes Dot1x: yes This is an example of output from the show interfaces interface description command when the interface has been described as Connects to Marketing by using the description interface configuration command. Switch# show interfaces gigabitethernet0/2 description Interface Status Protocol Description Gi0/2 up down Connects to Marketing This is an example of output from the show interfaces etherchannel command when port channels are configured on the switch: Switch# show interfaces etherchannel ---- Port-channel1: Age of the Port-channel = 03d:20h:17m:29s Logical slot/port = 10/1 Number of ports = 0 GC = 0x00000000 HotStandBy port = null Port state = Port-channel Ag-Not-Inuse Port-channel2: Age of the Port-channel = 03d:20h:17m:29s Logical slot/port = 10/2 Number of ports = 0 GC = 0x00000000 HotStandBy port = null Port state = Port-channel Ag-Not-Inuse Port-channel3: Age of the Port-channel = 03d:20h:17m:29s Logical slot/port = 10/3 Number of ports = 0 GC = 0x00000000 HotStandBy port = null Port state = Port-channel Ag-Not-Inuse 2-404 Catalyst 3560 Switch Command Reference 78-16405-05