Cisco WS-C3560E-48PD-SF Command Reference - Page 660

switchport mode Chapter 2 Catalyst 3560 Switch Cisco IOS Commands Examples This example shows how to configure a port for access mode: Switch(config)# interface gigabitethernet0/1 Switch(config-if)# switchport mode access This example shows how set the port to dynamic desirable mode: Switch(config)# interface gigabitethernet0/1 Switch(config-if)# switchport mode dynamic desirable This example shows how to configure a port for trunk mode: Switch(config)# interface gigabitethernet0/1 Switch(config-if)# switchport mode trunk This example shows how to configure a port as an IEEE 802.1Q tunnel port: Switch(config)# interface gigabitethernet0/1 Switch(config-if)# switchport mode dot1q-tunnel You can verify your settings by entering the show interfaces interface-id switchport privileged EXEC command and examining information in the Administrative Mode and Operational Mode rows. Related Commands Command show interfaces switchport switchport access switchport trunk Description Displays the administrative and operational status of a switching (nonrouting) port, including port blocking and port protection settings. Configures a port as a static-access or dynamic-access port. Configures the trunk characteristics when an interface is in trunking mode. 2-628 Catalyst 3560 Switch Command Reference 78-16405-05