Cisco WS-C3560E-48PD-SF Command Reference - Page 445

Chapter 2 Catalyst 3560 Switch Cisco IOS Commands show inventory show inventory Use the show inventory user EXEC command to display product identification (PID) information for the hardware. show inventory [entity-name | raw] [ | {begin | exclude | include} expression] Syntax Description entity-name raw | begin | exclude | include expression (Optional) Display the specified entity. For example, enter the interface (such as gigabitethernet0/1) into which a small form-factor pluggable (SFP) module is installed. (Optional) Display every entity in the device. (Optional) Display begins with the line that matches the expression. (Optional) Display excludes lines that match the expression. (Optional) Display includes lines that match the specified expression. Expression in the output to use as a reference point. Command Modes User EXEC Command History Release 12.2(25)SEC Modification This command was introduced. Usage Guidelines The command is case sensitive. With no arguments, the show inventory command produces a compact dump of all identifiable entities that have a product identifier. The compact dump displays the entity location (slot identity), entity description, and the unique device identifier (UDI) (PID, VID, and SN) of that entity. Note If there is no PID, no output appears when you enter the show inventory command. Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output are not displayed, but the lines that contain Output are displayed. Examples This is example output from the show inventory command: Switch> show inventory NAME: "1", DESCR: "WS-C3560G-48PS" PID: WS-C3560G-48PS-S , VID: 01 , SN: FOC0916U0BT 78-16405-05 Catalyst 3560 Switch Command Reference 2-413