Cisco WS-C3560E-48PD-SF Command Reference - Page 290

mls qos srr-queue input buffers Chapter 2 Catalyst 3560 Switch Cisco IOS Commands mls qos srr-queue input buffers Use the mls qos srr-queue input buffers global configuration command to allocate the buffers between the ingress queues. Use the no form of this command to return to the default setting. mls qos srr-queue input buffers percentage1 percentage2 no mls qos srr-queue input buffers Syntax Description percentage1 percentage2 Percentage of buffers allocated to ingress queues 1 and 2. The range is 0 to 100. Separate each value with a space. Defaults Ninety percent of the buffers is allocated to queue 1, and 10 percent of the buffers is allocated to queue 2. Command Modes Global configuration Command History Release 12.1(19)EA1 Modification This command was introduced. Usage Guidelines You should allocate the buffers so that the queues can handle any incoming bursty traffic. Examples This example shows how to allocate 60 percent of the buffer space to ingress queue 1 and 40 percent of the buffer space to ingress queue 2: Switch(config)# mls qos srr-queue input buffers 60 40 You can verify your settings by entering the show mls qos interface [interface-id] buffers or the show mls qos input-queue privileged EXEC command. Related Commands Command mls qos srr-queue input bandwidth mls qos srr-queue input cos-map mls qos srr-queue input dscp-map mls qos srr-queue input priority-queue mls qos srr-queue input threshold Description Assigns shaped round robin (SRR) weights to an ingress queue. Maps class of service (CoS) values to an ingress queue or maps CoS values to a queue and to a threshold ID. Maps Differentiated Services Code Point (DSCP) values to an ingress queue or maps DSCP values to a queue and to a threshold ID. Configures the ingress priority queue and guarantees bandwidth. Assigns weighted tail-drop (WTD) threshold percentages to an ingress queue. 2-258 Catalyst 3560 Switch Command Reference 78-16405-05