Cisco WS-C3560E-48PD-SF Command Reference - Page 544
show power inline
View all Cisco WS-C3560E-48PD-SF manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 544 highlights
show power inline Chapter 2 Catalyst 3560 Switch Cisco IOS Commands show power inline Use the show power inline user EXEC command to display the Power over Ethernet (PoE) status for the specified PoE port or for all PoE ports. show power inline [interface-id | consumption default] [ | {begin | exclude | include} expression] Syntax Description interface-id consumption default | begin | exclude | include expression (Optional) Display PoE-related power management information for the specified interface. (Optional) Display the power allocated to devices connected to PoE ports. (Optional) Display begins with the line that matches the expression. (Optional) Display excludes lines that match the expression. (Optional) Display includes lines that match the specified expression. Expression in the output to use as a reference point. Command Modes User EXEC Command History Release 12.1(19)EA1 12.2(25)SEC Modification This command was introduced. The consumption default keywords were added. Usage Guidelines Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output do not appear, but the lines that contain Output appear. Examples This is an example of output from the show power inline command. In the display, port 2 is configured as static; power has been pre-allocated to this port, but no powered device is connected. Port 6 is a static port in the power-deny state because its maximum wattage is configured for 10 W. The connected powered device has a reported class maximum wattage for a Class 0 or Class 3 device. Switch> show power inline Available:370.0(w) Used:80.6(w) Remaining:289.4(w) Interface Admin Oper Power Device Class Max (Watts) Fa0/1 auto on 6.3 IP Phone 7910 n/a 15.4 Fa0/2 static off 15.4 n/a n/a 15.4 Fa0/3 auto on 6.3 IP Phone 7910 n/a 15.4 Fa0/4 auto on 6.3 IP Phone 7960 2 15.4 Fa0/5 static on 15.4 IP Phone 7960 2 15.4 Fa0/6 static power-deny 10.0 n/a n/a 10.0 Fa0/7 auto on 6.3 IP Phone 7910 n/a 15.4 This is an example of output from the show power inline command on a port: Switch> show power inline fastethernet0/1 2-512 Catalyst 3560 Switch Command Reference 78-16405-05