Cisco WS-C3560E-48PD-SF Command Reference - Page 464
show ip source binding, Catalyst 3560 Switch Command Reference,
View all Cisco WS-C3560E-48PD-SF manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 464 highlights
show ip source binding Chapter 2 Catalyst 3560 Switch Cisco IOS Commands show ip source binding Use the show ip source binding user EXEC command to display the IP source bindings on the switch. show ip source binding [ip-address] [mac-address] [dhcp-snooping | static] [interface interface-id] [vlan vlan-id] [ | {begin | exclude | include} expression] This command is available only if your switch is running the IP services image, formerly known as the enhanced multilayer image (EMI). Syntax Description ip-address mac-address dhcp-snooping static interface interface-id vlan vlan-id | begin | exclude | include expression (Optional) Display IP source bindings for a specific IP address. (Optional) Display IP source bindings for a specific MAC address. (Optional) Display IP source bindings that were learned by DHCP snooping. (Optional) Display static IP source bindings. (Optional) Display IP source bindings on a specific interface. (Optional) Display IP source bindings on a specific VLAN. (Optional) Display begins with the line that matches the expression. (Optional) Display excludes lines that match the expression. (Optional) Display includes lines that match the specified expression. Expression in the output to use as a reference point. Command Modes User EXEC Command History Release 12.2(20)SE Modification This command was introduced. Usage Guidelines The show ip source binding command output shows the dynamically and statically configured bindings in the DHCP snooping binding database. Use the show ip dhcp snooping binding privileged EXEC command to display only the dynamically configured bindings. Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output do not appear, but the lines that contain Output appear. Examples This is an example of output from the show ip source binding command: Switch> show ip source binding MacAddress IpAddress 00:00:00:0A:00:0B 11.0.0.1 00:00:00:0A:00:0A 11.0.0.2 Lease(sec) ---------infinite 10000 Type static dhcp-snooping VLAN ---10 10 Interface GigabitEthernet0/1 GigabitEthernet0/1 2-432 Catalyst 3560 Switch Command Reference 78-16405-05