Cisco WS-C3560E-48PD-SF Command Reference - Page 387
Related Commands, Field, Description, Command, boot config-file, boot enable-break, boot manual
View all Cisco WS-C3560E-48PD-SF manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 387 highlights
Chapter 2 Catalyst 3560 Switch Cisco IOS Commands show boot Table 2-17 show boot Field Descriptions Field BOOT path-list Config file Private Config file Enable Break Manual Boot Helper path-list NVRAM/Config file buffer size Description Displays a semicolon separated list of executable files to try to load and execute when automatically booting. If the BOOT environment variable is not set, the system attempts to load and execute the first executable image it can find by using a recursive, depth-first search through the flash file system. In a depth-first search of a directory, each encountered subdirectory is completely searched before continuing the search in the original directory. If the BOOT variable is set but the specified images cannot be loaded, the system attempts to boot the first bootable file that it can find in the flash file system. Displays the filename that Cisco IOS uses to read and write a nonvolatile copy of the system configuration. Displays the filename that Cisco IOS uses to read and write a nonvolatile copy of the system configuration. Displays whether a break during booting is enabled or disabled. If it is set to yes, on, or 1, you can interrupt the automatic boot process by pressing the Break key on the console after the flash file system is initialized. Displays whether the switch automatically or manually boots. If it is set to no or 0, the boot loader attempts to automatically boot the system. If it is set to anything else, you must manually boot the switch from the boot loader mode. Displays a semicolon separated list of loadable files to dynamically load during the boot loader initialization. Helper files extend or patch the functionality of the boot loader. Displays the buffer size that Cisco IOS uses to hold a copy of the configuration file in memory. The configuration file cannot be larger than the buffer size allocation. Related Commands Command boot config-file boot enable-break boot manual boot private-config-file boot system Description Specifies the filename that Cisco IOS uses to read and write a nonvolatile copy of the system configuration. Enables interrupting the automatic boot process. Enables manually booting the switch during the next boot cycle. Specifies the filename that Cisco IOS uses to read and write a nonvolatile copy of the private configuration. Specifies the Cisco IOS image to load during the next boot cycle. 78-16405-05 Catalyst 3560 Switch Command Reference 2-355