Cisco WS-C3560E-48PD-SF Command Reference - Page 308
Defaults, Command Modes, Command History, Release, Modification
View all Cisco WS-C3560E-48PD-SF manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 308 highlights
monitor session Chapter 2 Catalyst 3560 Switch Cisco IOS Commands untagged vlan vlan-id vlan vlan-id remote vlan vlan-id , filter vlan vlan-id source both, rx, tx source vlan vlan-id all, local, remote Accept incoming packets with untagged encapsulation with the specified VLAN as the default VLAN. When used with only the ingress keyword, set default VLAN for ingress traffic. Specify the remote VLAN for an RSPAN source or destination session. The range is 2 to 1001 and 1006 to 4094. The RSPAN VLAN cannot be VLAN 1 (the default VLAN) or VLAN IDs 1002 to 1005 (reserved for Token Ring and FDDI VLANs). (Optional) Specify a series of interfaces or VLANs, or separate a range of interfaces or VLANs from a previous range. Enter a space before and after the comma. (Optional) Specify a range of interfaces or VLANs. Enter a space before and after the hyphen. Specify a list of VLANs as filters on trunk source ports to limit SPAN source traffic to specific VLANs. The vlan-id range is 1 to 4094. Specify the SPAN or RSPAN source. A source can be a physical port, a port channel, or a VLAN. (Optional) Specify the traffic direction to monitor. If you do not specify a traffic direction, the source interface sends both transmitted and received traffic. Specify the SPAN source interface as a VLAN ID. The range is 1 to 4094. Specify all, local, or remote with the no monitor session command to clear all SPAN and RSPAN, all local SPAN, or all RSPAN sessions. Defaults No monitor sessions are configured. On a source interface, the default is to monitor both received and transmitted traffic. On a trunk interface used as a source port, all VLANs are monitored. If encapsulation replicate is not specified on a local SPAN destination port, packets are sent in native form with no encapsulation tag. Ingress forwarding is disabled on destination ports. Command Modes Global configuration Command History Release 12.1(19)EA1 Modification This command was introduced. 2-276 Catalyst 3560 Switch Command Reference 78-16405-05