Cisco WS-C3560E-48PD-SF Command Reference - Page 91
cluster holdtime
View all Cisco WS-C3560E-48PD-SF manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 91 highlights
Chapter 2 Catalyst 3560 Switch Cisco IOS Commands cluster holdtime cluster holdtime Use the cluster holdtime global configuration command to set the duration in seconds before a switch (either the command or cluster member switch) declares the other switch down after not receiving heartbeat messages. Use the no form of this command to set the duration to the default value. cluster holdtime holdtime-in-secs no cluster holdtime Syntax Description holdtime-in-secs Duration in seconds before a switch (either a command or cluster member switch) declares the other switch down. The range is 1 to 300 seconds. Defaults The default holdtime is 80 seconds. Command Modes Global configuration Command History Release 12.1(19)EA1 Modification This command was introduced. Usage Guidelines Enter this command with the cluster timer global configuration command only on the cluster command switch. The cluster command switch propagates the values to all its cluster members so that the setting is consistent among all switches in the cluster. The holdtime is typically set as a multiple of the interval timer (cluster timer). For example, it takes (holdtime-in-secs divided by the interval-in-secs) number of heartbeat messages to be missed in a row to declare a switch down. Examples This example shows how to change the interval timer and the duration on the cluster command switch. Switch(config)# cluster timer 3 Switch(config)# cluster holdtime 30 You can verify your settings by entering the show cluster privileged EXEC command. Related Commands Command show cluster Description Displays the cluster status and a summary of the cluster to which the switch belongs. 78-16405-05 Catalyst 3560 Switch Command Reference 2-59