Cisco WS-C3560E-48PD-SF Command Reference - Page 765
debug cluster
View all Cisco WS-C3560E-48PD-SF manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 765 highlights
Appendix B Catalyst 3560 Switch Debug Commands debug cluster debug cluster Use the debug cluster privileged EXEC command to enable debugging of cluster-specific events. Use the no form of this command to disable debugging. debug cluster {discovery | events | extended | hsrp | http | ip [packet] | members | nat | neighbors | platform | snmp | vqpxy} no debug cluster {discovery | events | extended | hsrp | http | ip [packet] | members | nat | neighbors | platform | snmp | vqpxy} Syntax Description discovery events extended hsrp http ip [packet] members nat neighbors platform snmp vqpxy Display cluster discovery debug messages. Display cluster event debug messages. Display extended discovery debug messages. Display the Hot Standby Router Protocol (HSRP) debug messages. Display Hypertext Transfer Protocol (HTTP) debug messages. Display IP or transport packet debug messages. Display cluster member debug messages. Display Network Address Translation (NAT) debug messages. Display cluster neighbor debug messages. Display platform-specific cluster debug messages. Display Simple Network Management Protocol (SNMP) debug messages. Display VLAN Query Protocol (VQP) proxy debug messages. Defaults Debugging is disabled. Command Modes Privileged EXEC Command History Release 12.1(19)EA1 Modification This command was introduced. Usage Guidelines This command is available only on the cluster command switch. The undebug cluster command is the same as the no debug cluster command. 78-16405-05 Catalyst 3560 Switch Command Reference B-5