Cisco WS-C3560E-48PD-SF Command Reference - Page 583
snmp-server enable traps, rtr | snmp
View all Cisco WS-C3560E-48PD-SF manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 583 highlights
Chapter 2 Catalyst 3560 Switch Cisco IOS Commands snmp-server enable traps snmp-server enable traps Use the snmp-server enable traps global configuration command to enable the switch to send Simple Network Management Protocol (SNMP) notifications for various traps or inform requests to the network management system (NMS). Use the no form of this command to return to the default setting. snmp-server enable traps [bgp | bridge [newroot] [topologychange] | cluster | config | copy-config | entity | envmon [fan | shutdown | status | supply | temperature] | flash | hsrp | ipmulticast | mac-notification | msdp | ospf [cisco-specific | errors | lsa | rate-limit | retransmit | state-change] | pim [invalid-pim-message | neighbor-change | rp-mapping-change] | port-security [trap-rate value] | rtr | snmp [authentication | coldstart | linkdown | linkup | warmstart] | storm-control trap-rate value | stpx [inconsistency] [root-inconsistency] [loop-inconsistency] | syslog | tty | vlan-membership | vlancreate | vlandelete | vtp] no snmp-server enable traps [bgp | bridge [newroot] [topologychange] | cluster | config | copy-config | entity | envmon [fan | shutdown | status | supply | temperature] | flash | hsrp | ipmulticast | mac-notification | msdp | ospf [cisco-specific | errors | lsa | rate-limit | retransmit | state-change] | pim [invalid-pim-message | neighbor-change | rp-mapping-change] | port-security [trap-rate] | rtr | snmp [authentication | coldstart | linkdown | linkup | warmstart] | storm-control trap-rate | stpx [inconsistency] [root-inconsistency] [loop-inconsistency] | syslog | tty | vlan-membership | vlancreate | vlandelete | vtp] Syntax Description bgp bridge [newroot] [topologychange] cluster config copy-config entity envmon [fan | shutdown | status | supply | temperature] flash (Optional) Enable Border Gateway Protocol (BGP) state-change traps. Note This keyword is available only when the IP services image is installed on the switch. (Optional) Generate STP bridge MIB traps. The keywords have these meanings: • newroot-(Optional) Enable SNMP STP Bridge MIB new root traps. • topologychange-(Optional) Enable SNMP STP Bridge MIB topology change traps. (Optional) Enable cluster traps. (Optional) Enable SNMP configuration traps. (Optional) Enable SNMP copy-configuration traps. (Optional) Enable SNMP entity traps. Optional) Enable SNMP environmental traps. The keywords have these meanings: • fan-(Optional) Enable fan traps. • shutdown-(Optional) Enable environmental monitor shutdown traps. • status-(Optional) Enable SNMP environmental status-change traps. • supply-(Optional) Enable environmental monitor power-supply traps. • temperature-(Optional) Enable environmental monitor temperature traps. (Optional) Enable SNMP FLASH notifications. 78-16405-05 Catalyst 3560 Switch Command Reference 2-551