Cisco WS-C3560E-48PD-SF Command Reference - Page 411
show controllers utilization
View all Cisco WS-C3560E-48PD-SF manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 411 highlights
Chapter 2 Catalyst 3560 Switch Cisco IOS Commands show controllers utilization show controllers utilization Use the show controllers utilization user EXEC command to display bandwidth utilization on the switch or specific ports. show controllers [interface-id] utilization [ | {begin | exclude | include} expression] Syntax Description interface-id | begin | exclude | include expression (Optional) ID of the switch interface. (Optional) Display begins with the line that matches the specified expression. (Optional) Display excludes lines that match the specified expression. (Optional) Display includes lines that match the specified expression. Expression in the output to use as a reference point. Command Modes User EXEC Command History Release 12.2(25)SE Modification This command was introduced. Usage Guidelines Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output do not appear, but the lines that contain Output appear. Examples This is an example of output from the show controllers utilization command. Switch> show controllers utilization Port Receive Utilization Transmit Utilization Fa0/1 0 0 Fa0/2 0 0 Fa0/3 0 0 Fa0/4 0 0 Fa0/5 0 0 Fa0/6 0 0 Fa0/7 0 0 Switch Receive Bandwidth Percentage Utilization : 0 Switch Transmit Bandwidth Percentage Utilization : 0 Switch Fabric Percentage Utilization : 0 This is an example of output from the show controllers utilization command on a specific port: Switch> show controllers gigabitethernet0/1 utilization Receive Bandwidth Percentage Utilization : 0 Transmit Bandwidth Percentage Utilization : 0 78-16405-05 Catalyst 3560 Switch Command Reference 2-379