Cisco WS-C3560E-48PD-SF Command Reference - Page 297

Chapter 2 Catalyst 3560 Switch Cisco IOS Commands mls qos srr-queue input priority-queue Examples This example shows how to assign the ingress bandwidths for the queues. Queue 1 is the priority queue with 10 percent of the bandwidth allocated to it. The bandwidth ratio allocated to queues 1 and 2 is 4/(4+4). SRR services queue 1 (the priority queue) first for its configured 10 percent bandwidth. Then SRR equally shares the remaining 90 percent of the bandwidth between queues 1 and 2 by allocating 45 percent to each queue: Switch(config)# mls qos srr-queue input priority-queue 1 bandwidth 10 Switch(config)# mls qos srr-queue input bandwidth 4 4 You can verify your settings by entering the show mls qos interface [interface-id] queueing or the show mls qos input-queue privileged EXEC command. Related Commands Command mls qos srr-queue input bandwidth mls qos srr-queue input buffers mls qos srr-queue input cos-map mls qos srr-queue input dscp-map mls qos srr-queue input threshold show mls qos input-queue show mls qos interface queueing Description Assigns shaped round robin (SRR) weights to an ingress queue. Allocates the buffers between the ingress queues. Maps class of service (CoS) values to an ingress queue or maps CoS values to a queue and to a threshold ID. Maps Differentiated Services Code Point (DSCP) values to an ingress queue or maps DSCP values to a queue and to a threshold ID. Assigns weighted tail-drop (WTD) threshold percentages to an ingress queue. Displays ingress queue settings. Displays quality of service (QoS) information. 78-16405-05 Catalyst 3560 Switch Command Reference 2-265