Cisco WS-C3560E-48PD-SF Command Reference - Page 532

show mvr members Chapter 2 Catalyst 3560 Switch Cisco IOS Commands show mvr members Use the show mvr members privileged EXEC command to display all receiver and source ports that are currently members of an IP multicast group. show mvr members [ip-address] [ | {begin | exclude | include} expression] Syntax Description ip-address | begin | exclude | include expression (Optional) The IP multicast address. If the address is entered, all receiver and source ports that are members of the multicast group appear. If no address is entered, all members of all Multicast VLAN Registration (MVR) groups are listed. If a group has no members, the group is listed as Inactive. (Optional) Display begins with the line that matches the expression. (Optional) Display excludes lines that match the expression. (Optional) Display includes lines that match the specified expression. Expression in the output to use as a reference point. Command Modes Privileged EXEC Command History Release 12.1(19)EA1 Modification This command was introduced. Usage Guidelines The show mvr members command applies to receiver and source ports. For MVR-compatible mode, all source ports are members of all multicast groups. Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output do not appear, but the lines that contain Output appear. Examples This is an example of output from the show mvr members command: Switch# show mvr members MVR Group IP Status 239.255.0.1 ACTIVE 239.255.0.2 INACTIVE 239.255.0.3 INACTIVE 239.255.0.4 INACTIVE 239.255.0.5 INACTIVE 239.255.0.6 INACTIVE 239.255.0.7 INACTIVE 239.255.0.8 INACTIVE 239.255.0.9 INACTIVE 239.255.0.10 INACTIVE Members ------Gi0/1(d), Gi0/5(s) None None None None None None None None None 2-500 Catalyst 3560 Switch Command Reference 78-16405-05