Cisco WS-C3560E-48PD-SF Command Reference - Page 539

Chapter 2 Catalyst 3560 Switch Cisco IOS Commands show policy-map show policy-map Use the show policy-map user EXEC command to display quality of service (QoS) policy maps, which define classification criteria for incoming traffic. Policy maps can include policers that specify the bandwidth limitations and the action to take if the limits are exceeded. show policy-map [policy-map-name [class class-map-name]] [ | {begin | exclude | include} expression] Syntax Description policy-map-name class class-map-name | begin | exclude | include expression (Optional) Display the specified policy-map name. (Optional) Display QoS policy actions for a individual class. (Optional) Display begins with the line that matches the expression. (Optional) Display excludes lines that match the expression. (Optional) Display includes lines that match the specified expression. Expression in the output to use as a reference point. Note Though visible in the command-line help string, the control-plane and interface keywords are not supported, and the statistics shown in the display should be ignored. Command Modes User EXEC Command History Release 12.1(19)EA1 Modification This command was introduced. Usage Guidelines Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output do not appear, but the lines that contain Output appear. Examples This is an example of output from the show policy-map command: Switch> show policy-map Policy Map videowizard_policy2 class videowizard_10-10-10-10 set dscp 34 police 100000000 2000000 exceed-action drop Policy Map mypolicy class dscp5 set dscp 6 78-16405-05 Catalyst 3560 Switch Command Reference 2-507