Cisco WS-C3560E-48PD-SF Command Reference - Page 398

show controllers cpu-interface Chapter 2 Catalyst 3560 Switch Cisco IOS Commands show controllers cpu-interface Use the show controllers cpu-interface privileged EXEC command to display the state of the CPU network interface ASIC and the send and receive statistics for packets reaching the CPU. show controllers cpu-interface [ | {begin | exclude | include} expression] Syntax Description | begin | exclude | include expression (Optional) Display begins with the line that matches the expression. (Optional) Display excludes lines that match the expression. (Optional) Display includes lines that match the specified expression. Expression in the output to use as a reference point. Command Modes Privileged EXEC Command History Release 12.1(19)EA1 Modification This command was introduced. Usage Guidelines This display provides information that might be useful for Cisco technical support representatives troubleshooting the switch. Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output are not displayed, but the lines that contain Output are displayed. Examples This is a partial output example from the show controllers cpu-interface command: Switch# show controllers cpu-interface cpu-queue-frames retrieved dropped invalid hol-block rpc 4523063 0 0 0 stp 1545035 0 0 0 ipc 1903047 0 0 0 routing protocol 96145 0 0 0 L2 protocol 79596 0 0 0 remote console 0 0 0 0 sw forwarding 5756 0 0 0 host 225646 0 0 0 broadcast 46472 0 0 0 cbt-to-spt 0 0 0 0 igmp snooping 68411 0 0 0 icmp 0 0 0 0 logging 0 0 0 0 rpf-fail 0 0 0 0 queue14 0 0 0 0 cpu heartbeat 1710501 0 0 0 2-366 Catalyst 3560 Switch Command Reference 78-16405-05