Cisco WS-C3560E-48PD-SF Command Reference - Page 817

Appendix B Catalyst 3560 Switch Debug Commands debug platform port-security debug platform port-security Use the debug platform port-security privileged EXEC command to enable debugging of platform-dependent port-security information. Use the no form of this command to disable debugging. debug platform port-security {add | aging | all | delete | errors | rpc | warnings} no debug platform port-security {add | aging | all | delete | errors | rpc | warnings} Syntax Description add aging all delete errors rpc warnings Display secure address addition debug messages. Display secure address aging debug messages. Display all port-security debug messages. Display secure address deletion debug messages. Display port-security error debug messages. Display remote procedure call (RPC) debug messages. Display warning debug messages. Defaults Debugging is disabled. Command Modes Privileged EXEC Command History Release 12.1(19)EA1 Modification This command was introduced. Usage Guidelines The undebug platform port-security command is the same as the no debug platform port-security command. Related Commands Command show debugging Description Displays information about the types of debugging that are enabled. For syntax information, see the Cisco IOS Release 12.2 Configuration Guides and Command References > Cisco IOS Configuration Fundamentals Configuration Guide, Release 12.2 > System Management > Troubleshooting and Fault Management. 78-16405-05 Catalyst 3560 Switch Command Reference B-57