Cisco WS-C3560E-48PD-SF Command Reference - Page 524

show mls qos vlan Chapter 2 Catalyst 3560 Switch Cisco IOS Commands show mls qos vlan Use the show mls qos vlan user EXEC command to display the policy maps attached to a switch virtual interface (SVI). show mls qos vlan vlan-id [ | {begin | exclude | include} expression] Syntax Description vlan-id | begin | exclude | include expression Specify the VLAN ID of the SVI to display the policy maps. The range is 1 to 4094. (Optional) Display begins with the line that matches the expression. (Optional) Display excludes lines that match the expression. (Optional) Display includes lines that match the specified expression. Expression in the output to use as a reference point. Command Modes User EXEC Command History Release 12.2(25)SE Modification This command was introduced. Usage Guidelines The output from the show mls qos vlan command is meaningful only when VLAN-based quality of service (QoS) is enabled and when hierarchical policy maps are configured. Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output do not appear, but the lines that contain Output appear. Examples This is an example of output from the show mls qos vlan command: Switch> show mls qos vlan 10 Vlan10 Attached policy-map for Ingress:pm-test-pm-2 Related Commands Command policy-map Description Creates or modifies a policy map that can be attached to multiple ports and enters policy-map configuration mode. 2-492 Catalyst 3560 Switch Command Reference 78-16405-05