Cisco WS-C3560E-48PD-SF Command Reference - Page 145

Chapter 2 Catalyst 3560 Switch Cisco IOS Commands exception crashinfo exception crashinfo Use the exception crashinfo global configuration command to configure the switch to create the extended crashinfo file when the Cisco IOS image fails. Use the no form of this command to disable this feature. exception crashinfo no exception crashinfo Syntax Description This command has no arguments or keywords. Defaults The switch creates the extended crashinfo file. Command Modes Global configuration Command History Release 12.2(25)SEC Modification This command was introduced. Usage Guidelines The basic crashinfo file includes the Cisco IOS image name and version that failed, a list of the processor registers, and a stack trace. The extended crashinfo file includes additional information that can help determine the cause of the switch failure. If you enter the exception crashinfo global configuration command on a stack master, it configures all the stack members to create the extended crashinfo file if the Cisco IOS image on the stack members fail. Use the no exception crashinfo global configuration command to configure the switch to not create the extended crashinfo file. Examples This example shows how to configure the switch to not create the extended crashinfo file: Switch(config)# no exception crashinfo You can verify your settings by entering the show running-config privileged EXEC command. Related Commands Command show running-config Description Displays the operating configuration, including defined macros. For syntax information, select Cisco IOS Configuration Fundamentals Command Reference, Release 12.2 > File Management Commands > Configuration File Management Commands. 78-16405-05 Catalyst 3560 Switch Command Reference 2-113