Cisco WS-C3560E-48PD-SF Command Reference - Page 590
no snmp-server host informs
View all Cisco WS-C3560E-48PD-SF manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 590 highlights
snmp-server host Chapter 2 Catalyst 3560 Switch Cisco IOS Commands The no snmp-server host command with no keywords disables traps, but not informs, to the host. To disable informs, use the no snmp-server host informs command. Examples This example shows how to configure a unique SNMP community string named comaccess for traps and prevent SNMP polling access with this string through access-list 10: Switch(config)# snmp-server community comaccess ro 10 Switch(config)# snmp-server host 172.20.2.160 comaccess Switch(config)# access-list 10 deny any This example shows how to send the SNMP traps to the host specified by the name myhost.cisco.com. The community string is defined as comaccess: Switch(config)# snmp-server enable traps Switch(config)# snmp-server host myhost.cisco.com comaccess snmp This example shows how to enable the switch to send all traps to the host myhost.cisco.com by using the community string public: Switch(config)# snmp-server enable traps Switch(config)# snmp-server host myhost.cisco.com public You can verify your settings by entering the show running-config privileged EXEC command. Related Commands Command Description show running-config Displays the running configuration on the switch. For syntax information, select Cisco IOS Configuration Fundamentals Command Reference, Release 12.2 > File Management Commands > Configuration File Management Commands. snmp-server enable traps Enables SNMP notification for various trap types or inform requests. 2-558 Catalyst 3560 Switch Command Reference 78-16405-05