Cisco WS-C3560E-48PD-SF Command Reference - Page 95

Chapter 2 Catalyst 3560 Switch Cisco IOS Commands cluster run cluster run Use the cluster run global configuration command to enable clustering on a switch. Use the no form of this command to disable clustering on a switch. cluster run no cluster run Syntax Description This command has no arguments or keywords. Defaults Clustering is enabled on all switches. Command Modes Global configuration Command History Release 12.1(19)EA1 Modification This command was introduced. Usage Guidelines When you enter the no cluster run command on a cluster command switch, the cluster command switch is disabled. Clustering is disabled, and the switch cannot become a candidate switch. When you enter the no cluster run command on a cluster member switch, it is removed from the cluster. Clustering is disabled, and the switch cannot become a candidate switch. When you enter the no cluster run command on a switch that is not part of a cluster, clustering is disabled on this switch. This switch cannot then become a candidate switch. Examples This example shows how to disable clustering on the cluster command switch: Switch(config)# no cluster run You can verify your setting by entering the show cluster privileged EXEC command. Related Commands Command show cluster Description Displays the cluster status and a summary of the cluster to which the switch belongs. 78-16405-05 Catalyst 3560 Switch Command Reference 2-63