Cisco WS-C3560E-48PD-SF Command Reference - Page 719

Chapter 2 Catalyst 3560 Switch Cisco IOS Commands vlan filter vlan filter Use the vlan filter global configuration command to apply a VLAN map to one or more VLANs. Use the no form of this command to remove the map. vlan filter mapname vlan-list {list | all} no vlan filter mapname vlan-list {list | all} Syntax Description mapname list all Name of the VLAN map entry. The list of one or more VLANs in the form tt, uu-vv, xx, yy-zz, where spaces around commas and dashes are optional. The range is 1 to 4094. Remove the filter from all VLANs. Defaults There are no VLAN filters. Command Modes Global configuration Command History Release 12.1(19)EA1 Modification This command was introduced. Usage Guidelines To avoid accidentally dropping too many packets and disabling connectivity in the middle of the configuration process, we recommend that you completely define the VLAN access map before applying it to a VLAN. For more information about VLAN map entries, see the software configuration guide for this release. Examples This example applies VLAN map entry map1 to VLANs 20 and 30: Switch(config)# vlan filter map1 vlan-list 20, 30 This example shows how to delete VLAN map entry mac1 from VLAN 20: Switch(config)# no vlan filter map1 vlan-list 20 You can verify your settings by entering the show vlan filter privileged EXEC command. 78-16405-05 Catalyst 3560 Switch Command Reference 2-687