Cisco WS-C3560E-48PD-SF Command Reference - Page 284

mls qos queue-set output threshold Chapter 2 Catalyst 3560 Switch Cisco IOS Commands mls qos queue-set output threshold Use the mls qos queue-set output threshold global configuration command to configure the weighted tail-drop (WTD) thresholds, to guarantee the availability of buffers, and to configure the maximum memory allocation to a queue-set (four egress queues per port). Use the no form of this command to return to the default setting. mls qos queue-set output qset-id threshold queue-id drop-threshold1 drop-threshold2 reserved-threshold maximum-threshold no mls qos queue-set output qset-id threshold [queue-id] Syntax Description qset-id queue-id drop-threshold1 drop-threshold2 reserved-threshold maximum-threshold ID of the queue-set. Each port belongs to a queue-set, which defines all the characteristics of the four egress queues per port. The range is 1 to 2. Specific queue in the queue-set on which the command is performed. The range is 1 to 4. Two WTD thresholds expressed as a percentage of the queue's allocated memory. The range is 1 to 400 percent. Amount of memory to be guaranteed (reserved) for the queue and expressed as a percentage of the allocated memory. The range is 1 to 100 percent. Enable a queue in the full condition to get more buffers than are reserved for it. This is the maximum memory the queue can have before the packets are dropped. The range is 1 to 400 percent. Defaults When quality of service (QoS) is enabled, WTD is enabled. Table 2-9 shows the default WTD threshold settings. Table 2-9 Default Egress Queue WTD Threshold Settings Feature WTD Drop Threshold 1 WTD Drop Threshold 2 Reserved Threshold Maximum Threshold Queue 1 100 percent 100 percent 50 percent 400 percent Queue 2 200 percent 200 percent 100 percent 400 percent Queue 3 100 percent 100 percent 50 percent 400 percent Queue 4 100 percent 100 percent 50 percent 400 percent Command Modes Global configuration Command History Release 12.1(19)EA1 Modification This command was introduced. 2-252 Catalyst 3560 Switch Command Reference 78-16405-05