Yamaha AW4416 Owner's Manual - Page 100
Overdubbing, Set the input level
View all Yamaha AW4416 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 100 highlights
Chapter5-Recording on the AW4416 Overdubbing In this section we will explain how to record an electric bass connected to INPUT 8 (HI-Z) jack while monitoring the rhythm machine (or drums) recorded on tracks 1/2. Set the input level 1. While producing sound on your instrument, adjust [GAIN] control 8 so that the PEAK indicator of INPUT 8 (HI-Z) lights briefly when you play most loudly. The INPUT 8 (HI-Z) jack is an input jack designed for high impedance instruments. It cannot be used simultaneously with the conventional INPUT 8 (phone) jack. 2. Press the [HOME] key ¡ [F1] key. The HOME screen 1-24/Rtn page will appear. 3. Press the MIXING LAYER section [1-16] key to select input channels 1- 16 as the mixing layer. 4. Make sure that [ON] key 8 is turned on, and raise fader 8 to the 0 dB position. To avoid confusion, turn off the [ON] keys for all input channels that you are not using. 5. While producing sound on your instrument, watch the input level of input channel 8 that is displayed in the on-screen level meter. If the AW4416 is in the initial state, the electric bass connected to the INPUT 8 (HI-Z) jack will be sent to input channel 8. If the level meter reaches the "CLIP" position, lower [GAIN] control 8. 87 - Operation Guide