Yamaha AW4416 Owner's Manual - Page 97
Raise the MONITOR OUT control/PHONES control., L/R level meter
View all Yamaha AW4416 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 97 highlights
Chapter5-Recording on the AW4416 6. In the same way as for the input channels, set the PAN knobs of monitor channels 1/2 to far left (L16) for channel 1 and far right (R16) for channel 2. 7. Make sure that [ON] keys 1/2 and the STEREO [ON] key are on, and raise faders 1/2 and the STEREO fader to the 0 dB position. When tracks are paired, you must operate only one of the faders. Attempting to move both faders simultaneously will place a strain on the motor, and may cause malfunctions. 8. While producing sound on your instrument, watch the L/R level meters of the level meter/counter. The signal from the rhythm machine (or drum mics) will be sent via tracks 1/2 ¡ monitor channels 1/2 to the stereo bus. If the red 0 dB segment lights, lower faders 1/2 (input level of monitor channels 1/2). E H M S F ms WORD CLOCK MTC SCENE REMAIN ABS 44.1k 48k LOCK MASTER REL INT EXT VARI SLAVE E -dB 0 FINE 2 -dB 0 FINE 2 6 6 10 12 10 12 14 20 14 20 18 30 20 42 18 30 20 42 26 60 26 60 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 LR READY READY INPUT INPUT -dB 0 FINE 2 6 10 12 14 20 18 30 20 42 26 60 LR READY INPUT L/R level meter 9. Raise the MONITOR OUT control/PHONES control. You can monitor the input signal via your monitor system or headphones. Note that the signals being controlled here are not the signals recorded on the recorder; rather, they are the signals passing through the recorder. Operating the pan, fader, or [ON] key of a monitor channel will not affect the signal that is recorded. 84 - Operation Guide