Yamaha AW4416 Owner's Manual - Page 251
Press the [SONG] key, F2] key, and turn on the MEASURE button
View all Yamaha AW4416 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 251 highlights
4. Press the [F2] key. The MIDI Sync page will appear in the display. Chapter15-MIDI 5. Move the cursor to the MIDI CLOCK button in the SYNC OUT area, and press the [ENTER] key. Also make sure that the MASTER button in the MTC SYNC area is on. With these settings, MIDI Clock messages will be transmitted from the MIDI OUT/THRU connector when the AW4416 is running. 6. Press the [SONG] key ¡ [F2] key, and turn on the MEASURE button in the DISPLAY area. The counter display will be in measure/beat/tick (1/960th of a quarter note) units. With this setting, you will be able to specify locate positions in measure/beat units. 7. Press the [SONG] key, and then press the [F4] key. The left side of the screen will show the beat map in which you can input time signature data for the song, and the right side of the screen will show the tempo map in which you can input tempo data. With the default settings for a song, a time signature of 4/4 and a tempo of BPM=120.0 will be input at measure 1. Note In order for a MIDI sequencer to synchronize to the MIDI Clock messages send from the AW4416, tempo settings and time signature settings must be made on the AW4416. You can input this tempo data and time signature data in the Tempo Map page described above. 241 - Operation Guide