Yamaha AW4416 Owner's Manual - Page 253
Using MMC to control the AW4416
View all Yamaha AW4416 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 253 highlights
Chapter15-MIDI Using MMC to control the AW4416 MMC (MIDI Machine Control) is a group of MIDI messages used to control the transport of an audio recorder etc. from an external MIDI device. The AW4416 supports MMC transmission and reception. This means that an external MIDI device can control AW4416 transport operations, locate operations, selection and disabling of recording tracks, or conversely that the AW4416 can control transport and other operations on another MMC-compatible device. In this section we will explain how MMC can be used to control various operations of the AW4416 from an external MIDI sequencer while MTC is being used to synchronize the AW4416 and MIDI sequencer. 1. Connect the AW4416's MIDI IN connector to the MIDI OUT connector of the MIDI sequencer, and connect the AW4416's MTC OUT connector to the MIDI IN connector of the MIDI sequencer. In this case, the MIDI sequencer will be the MMC master (the device transmitting MTC) and MTC slave, and the AW4416 will be the MMC slave (the device receiving MMC) and MTC master. MTC OUT connector MIDI IN connector PROFESSIONAL AUDIO WORKSTATION AW4416 MMC slave MIDI IN connector MIDI OUT connector MIDI sequencer MMC master 2. As described in "Using MTC to synchronize the AW4416 and a MIDI sequencer" (¡ P.238), make settings on both devices so that the AW4416 and MIDI sequencer will run in synchronization. 3. Press the [MIDI] key, and then press the [F2] key. 243 - Operation Guide