Yamaha AW4416 Owner's Manual - Page 106
Press the [F1] key., and turn on the ON/OFF button located in
View all Yamaha AW4416 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 106 highlights
Chapter5-Recording on the AW4416 5. A CONFIRMATION popup window will appear, asking you confirm the recall operation. 6. Move the cursor to the OK button and press the [ENTER] key. The "E.B.Finger" dynamics program will be loaded into input channel 8. 7. Press the [F1] key. The DYN/DLY screen Dyn.Edit page will appear. In this page you can set the parameters of the dynamics processor. 8. Press the [ENTER] key, and turn on the ON/OFF button located in the lower left of the screen. As the name suggests, the ON/OFF button turns the dynamics processor on/off. 9. While playing the bass, move the cursor to the PARAMETER area in the lower right of the screen, and adjust the parameters of the dynamics processor. • Five types of dynamics processor are provided: CMP (compressor), EXP (expander), GAT (gate), CPS (compander S), and CPH (compander H). Each type has different parameters. (For details on the parameters of each type, see the Reference Guide.) • It is not possible to change the type of the dynamics processor in the Dyn.Edit page. For this reason if you wish to use a specific type, you must first load a program that uses that type from the dynamics library, and then modify its parameters as necessary. 93 - Operation Guide