Yamaha AW4416 Owner's Manual - Page 275
To begin playback, press the Transport PLAY] key., press the [STOP] key.
View all Yamaha AW4416 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 275 highlights
Chapter17-Mastering 5. Move the cursor to the CD PLAY MODE button, and press the [ENTER] key. The CD PLAY MODE button will change from OFF to ON, and track information for the CD-R/RW media in the drive will be displayed. 1 2 1 Currently selected track number (TRACK column) and elapsed time (TIME column). B Track numbers on the disc (TRACK column) and their track times (TIME column). • CD-R media that has not been finalized cannot be played back. • The counter in the level meters/counter section will not function while you are using the CD Play function. 6. Use the Locate section [ ]/[ ] keys to select the track that you wish to play. 7. To begin playback, press the Transport section [PLAY] key. The audio output of the CD-RW drive will be sent directly to the stereo bus. Use the STEREO fader to adjust the volume. 8. To stop playback, press the [STOP] key. Tip! While playback is stopped, you can press and hold the [REW]/[FF] keys to rewind or fast-forward. (However, there will be no sound.) 9. To exit the CD PLAY function, move the cursor to the CD PLAY MODE button and press the [ENTER] key. • While the CD Play function is being used, all keys except for [ ]/[ ], [PLAY], [STOP], [REW]/[FF], and [ENTER] will have no effect. • If you wish to perform other operations, turn off the CD Play function. 265 - Operation Guide