Yamaha AW4416 Owner's Manual - Page 108
Mixdown, Creating the mix balance of the tracks
View all Yamaha AW4416 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 108 highlights
Chapter5-Recording on the AW4416 Mixdown In this section we will explain the procedure for creating a stereo mix of the signals recorded on tracks 1-16, applying internal effects, and recording the stereo track on the hard disk. Creating the mix balance of the tracks 1. Make sure that [REC TRACK SELECT] keys 1-16 are dark (record-ready mode is defeated). Also make sure that the [ON] key is dark for all input channels 1-24. Tip! If necessary, the input signals from input channels 1-24 can be mixed down together with the signals of tracks 1-16. In this case, turn on the [ON] keys of the input channels that you wish to use, so that they are lit. 2. Press the [MONI] key. Monitor channels 1-16 will be selected as the mixing layer. 3. Press the [PAN] key ¡ [F3] key. The PAN/ROUTE screen Pan MONI page will appear, allowing you to make pan settings and bus assignments for monitor channels 1-16. 4. For monitor channels 1-16, turn the ST button on and the bus assign 1- 8 buttons off. With these settings, all monitor channels will be sent to the stereo bus. 5. Use the PAN knobs of monitor channels 1-16 to set the stereo position of each track. Tip! You can also use the [SEL] keys to select a channel and use the [PAN] control at the right of the display to set the pan of the corresponding monitor channel. 95 - Operation Guide