Yamaha AW4416 Owner's Manual - Page 248
Using MTC to synchronize the AW4416 and a MIDI sequencer
View all Yamaha AW4416 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 248 highlights
Chapter15-MIDI Using MTC to synchronize the AW4416 and a MIDI sequencer MTC can be transmitted from the MTC OUT connector of the AW4416 to an external device such as a MIDI sequencer or computer, causing the MIDI sequencer (or computer-based sequencer program) to synchronize to the AW4416 song. 1. Use a MIDI cable to connect the AW4416's MTC OUT connector to the MIDI IN connector of your MIDI sequencer. MTC OUT connector PROFESSIONAL AUDIO WORKSTATION MIDI IN connector AW4416 MTC master MIDI sequencer MTC slave 2. Press the [MIDI] key, and then press the [F2] key. The following screen will appear in the display. 3. Move the cursor to the MASTER button in the MTC SYNC area, and press the [ENTER] key. With this setting, the AW4416 will function as the MTC master (the device that transmits MTC). 4. Move the cursor to the MTC button in the SYNC OUT area, and press the [ENTER] key. With this setting, MTC will be transmitted from the MTC OUT connector when the AW4416 is running. 5. If you need to set the MTC frame rate, press the [SONG] key and then press the [F2] key. 238 - Operation Guide