Yamaha AW4416 Owner's Manual - Page 203
Naming a pad
View all Yamaha AW4416 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 203 highlights
Chapter12-Sampling pads Naming a pad You can name each pad to which a sample is assigned. 1. In the SAMPLING PAD section, press the [EDIT] pad ¡ [F4] key. The PAD Edit page will appear. 2. Move the cursor to the NAME menu and press the [ENTER] key. The display will show the PAD button used to select a pad, and the NAME button used to assign a name. NAME button 3. Move the cursor to the PAD button and press the [ENTER] key. The cursor will move to the PAD No. area at the lower right. 4. Use the [CURSOR] keys and the [DATA/JOG] dial to select the bank and number of the pad that you wish to name. 5. Press the [ENTER] key. The cursor will return to the PAD button. 193 - Operation Guide
Chapter12
—
Sampling pads
— Operation Guide
193
Naming a pad
You can name each pad to which a sample is assigned.
1.
In the SAMPLING PAD section, press the [EDIT] pad
→
[F4] key.
The PAD Edit page will appear.
2.
Move the cursor to the NAME menu and press the [ENTER] key.
The display will show the PAD button used to select a pad, and the NAME button
used to assign a name.
3.
Move the cursor to the PAD button and press the [ENTER] key.
The cursor will move to the PAD No. area at the lower right.
4.
Use the [CURSOR] keys and the [DATA/JOG] dial to select the bank and
number of the pad that you wish to name.
5.
Press the [ENTER] key.
The cursor will return to the PAD button.
NAME button