Yamaha AW4416 Owner's Manual - Page 96
Make monitor settings
View all Yamaha AW4416 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 96 highlights
Chapter5-Recording on the AW4416 When tracks are paired, you must operate only one of the faders. Attempting to move both faders simultaneously will place a strain on the motor, and may cause malfunctions. Make monitor settings Now we will send the signal of monitor channels 1/2 to the stereo bus, so that it can be monitored via the MONITOR OUT jacks or the PHONES jack. 1. Press the [PAN] key ¡ [F3] key. The PAN/ROUTE screen Pan MONI page will appear. In this page you can make bus assignments and pan settings for monitor channels 1-16. 2. Press the [MONI] key. Monitor channels 1-16 will be selected as the mixing layer. 3. Hold down [SEL] key 1, and press [SEL] key 2. Just as we did for input channels 1/2, we will also pair monitor channels 1/2. When you simultaneously hold down the monitor channel 1/2 [SEL] keys, the CHANNEL PAIRING popup window will appear. 4. Move the cursor to one of the three buttons and press the [ENTER] key. Monitor channels 1/2 will be paired. 5. In the monitor channel 1/2 area, make sure that the ST buttons are on and the 1-8 buttons are off. With these settings, the signal of the monitor channels will be sent to the stereo bus. 83 - Operation Guide