Yamaha AW4416 Owner's Manual - Page 176
Using AUX send/return to apply an effect
View all Yamaha AW4416 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 176 highlights
Chapter10-Internal effects Using AUX send/return to apply an effect As an example of using an effect with AUX send/return, here's how to apply effect 1 via AUX bus 7. ❒ Patching Make sure that the AUX send/return patching for effect 1 is appropriate. 1. Press the [SETUP] key ¡ [F1] (Patch IN) key. The SETUP screen Patch IN page will appear. If the Patch IN tab is not assigned to the [F1] key, press the [SHIFT] key + [F1] key to switch the tab, and then press the [F1] key. 2. Make sure that the EFFECT PATCH parameter EFF1 is set to "AUX 7." The EFFECT PATCH parameters select whether effects 1/2 will be used via AUX or inserted into a specific channel. By default, EFF1 (effect 1) is assigned to AUX 7 and EFF2 (effect 2) is assigned to AUX 8, as shown above. Tip! If EFF1 is set to "INSERT," move the cursor to the "INSERT" field and use the [DATA/ JOG] dial to change it to "AUX 7." Then move the cursor to the OK button and press the [ENTER] key. 3. Make sure that the MIXER CHANNEL INPUT ASSIGN parameter RTN1 is set to "EFF1 L/R." The MIXER CHANNEL INPUT ASSIGN area switches the signal that is assigned to the input channel/return channel of the mixer. By default, "EFF1 L/R" (L/R output of effect 1) is assigned to RTN1 (return channel 1). Tip! If RTN1 has been changed to another setting, move the cursor to the setting area, and rotate the [DATA/JOG] dial to change the setting to "EFF 1 L/R." 166 - Operation Guide