Yamaha AW4416 Owner's Manual - Page 103
buttons off., For monitor channel 3, turn the ST button on and the bus assign 1
View all Yamaha AW4416 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 103 highlights
Chapter5-Recording on the AW4416 Make monitor settings We will make settings so that the signal of the rhythm machine (drums) that were earlier recorded on tracks 1/2 and the bass signal being recorded on track 3 will be sent to the stereo bus, and can be monitored via the MONITOR OUT jacks or PHONES jack. 1. Press the [PAN] key ¡ [F3] key. The PAN/ROUTE screen PAN Moni page will appear, allowing you to make pan and bus assignment settings for monitor channels 1-16. 2. For monitor channel 3, turn the ST button on and the bus assign 1-8 buttons off. At this time, verify that the ST button is on and the bus assign 1-8 button is off for monitor channels 1-2 as well. 3. Move the cursor to the PAN knob of monitor channel 3, and pan the bass where you can monitor it most comfortably. 4. Make sure that [ON] key 3 is turned on. Then produce sound on your bass, and raise fader 3 to a volume that is comfortable for monitoring. 90 - Operation Guide