Yamaha AW4416 Owner's Manual - Page 157
ing level of tracks 1, nish recording on the AW4416, press the [ALL SAFE] key. - extract
View all Yamaha AW4416 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 157 highlights
Chapter8-Patching 6. Play back the audio source connected to the input jacks of the I/O cards (slots 1/2). The levels of the signals sent from the I/O card INPUT to tracks 1-16 (i.e., recording levels) will be displayed in the level meter/counter. 7. As necessary, use the faders of input channels 1-16 to adjust the recording level of tracks 1-16. The faders of input channels 1-16 will be reset to nominal level (0 dB) when Quick Rec is executed. Adjust the recording level if necessary. If you wish to use the faders to adjust the recording level, the POST FADER button must be turned on in the DIRECT OUT EXTRACT POSITION field of the UTILITY screen ¡ Prefer.1 page. 8. When you finish recording on the AW4416, press the [ALL SAFE] key. Record-ready and mute status will be canceled for all tracks. 145 - Operation Guide