Yamaha AW4416 Owner's Manual - Page 85
AW4416, Using a DAT recorder as the word clock master - digital recorder workstation
View all Yamaha AW4416 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 85 highlights
Chapter4-Connections and setup ❍ Using a DAT recorder as the word clock master If you wish to input a digital signal from a DAT recorder or sampler etc. into the AW4416 via the DIGITAL STEREO IN jack, turn on the D.ST IN button. PROFESSIONAL AUDIO WORKSTATION AW4416 (word clock slave) WORD CLOCK SOURCE= D.ST IN DAT recorder (word clock master) DIGITAL STEREO OUT 00.00.00.00 DAT DIGITAL STEREO IN • Set the DAT recorder so that it will operate according to its own internal clock. Most consumer DAT recorders are designed to forcibly follow the word clock of the input signal when recording. This type of DAT recorder can be used as the word clock master only when it is playing back. 4. After selecting the desired button, press the [ENTER] key. The AW4416 will switch to the specified clock source. • A slight interval of time is required for the AW4416 to select clock sources, and the sound may be muted during this time. • After switching the clock source, verify that the button you selected in step 3 is not marked with an X symbol or / symbol. If an X symbol or / symbol appears on the button, or if an error message is displayed, check the connections or the clock setting of the external device. 71 - Operation Guide