Yamaha AW4416 Owner's Manual - Page 143
Rehearsing and recording with auto punch- in/out, Rehearsing with auto punch-in/out
View all Yamaha AW4416 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 143 highlights
1. Press the [UTILITY] key ¡ [F3] key. Chapter7-Punch-in/out Pre-roll/post-roll time settings 2. Move the cursor to the pre-roll (PREROLL) or post-roll (POSTROLL) fields, and use the [DATA/JOG] dial to set the pre-roll time and post-roll time. Rehearsing and recording with auto punchin/out ❒ Rehearsing with auto punch-in/out 1. Press the [REC TRACK SELECT] key for the track that you wish to record using auto punch-in/out. The [REC TRACK SELECT] key will blink, and the track will be in record-ready mode. 2. Make sure that the Locate section [IN]/[OUT] keys are lit, and press the [AUTO PUNCH] key. The [AUTO PUNCH] key will light, and you will locate to the pre-roll point. While the [AUTO PUNCH] key is lit, transport/locate operations other than the [STOP]/[PLAY]/[REC] keys cannot be used. 3. To begin rehearsing the auto punch-in/out, press the [PLAY] key. 1 The [PLAY] key will light, and playback will begin from the pre-roll point. B When you reach the auto punch-in point, the [REC] key will begin blinking, and the monitor signal of the track you selected in step 1 will change from the track playback to the input signal (recording source). However, recording will not actually occur. C When you reach the auto punch-out point, the [REC] key will go dark, and the monitor signal will return to the track playback. (During rehearsal, recording will not actually occur.) D When you reach the post-roll point, the transport will locate to the pre-roll point and stop. 131 - Operation Guide