Yamaha AW4416 Owner's Manual - Page 40

Chapter1-Welcome to the world of the AW4416 Recorder input patching This section assigns the signals that are input to tracks 1-16 of the recorder section. The following types of signal can be selected. ❍ STEREO The stereo bus output signal that has passed through the stereo output channel. ❍ BUS 1-8 The output signal of buses 1-8. ❍ DIRECT OUT 1-16 The direct output signal of input channels 1-16. RECORDER INPUT 1~16 8 BUS 1~8 16 CH DIRECT OUT1~16 2 STEREO 16 DITHER RECORDER INPUT 1(...16) INPUT PATCH Monitor channels 1-16 These are monaural channels that are assigned to the track 1-16 outputs of the recorder section. According to the input monitor settings or the state of the transport, they will input either the signals being input to tracks 1-16, or the playback signals of tracks 1-16. As an exception, the stereo track will be patched to monitor channels 1/2 when the stereo track of that song is being played back, and the remainder of the monitor channels 3-16 will be muted. The structure of these channels is the same as that of the input channels, with the exception that the direct output is fixed at a point immediately before the attenuator. RECORDER MONI 1(...16) ... RECORDER RECORDER REPRO1-16 RECORDER ST Trk L/R 16 RECORDER INPUT 1-16 INPUT MONITOR (FL Display) METER METER INSERT 16 ATT RECORDER DIRECT OUT 2 METER METER PREFADER LISTEN/ AFTER PAN SOLO 4 BAND EQ DYNAMICS INPUT DELAY METER METER (EQ) (Gain Reduction) Mono in X 16 ON LEVEL PAN PRE/POST ON AUX INPUT PATCH BUS1 BUS2 BUS3 BUS4 BUS5 BUS6 BUS7 BUS8 STEREO L STEREO R SOLO L SOLO R AUX 1 AUX 6 AUX 7(EFF1) AUX 8(EFF2) 26 - Operation Guide