Yamaha AW4416 Owner's Manual - Page 44

Chapter1-Welcome to the world of the AW4416 By defeating these assignments, you can insert internal effects 1/2 into any desired channel, or use AUX bus 7/8 or return channels 1/2 for other purposes. AUX7 (EFF1), 2 AUX8 (EFF2) 46 INSERT SEND SELECT EFFECT METER EFFECT METER X 2 RETURN 1/2 Monitor output/headphone output As monitoring jacks, the AW4416 provides MONITOR OUT jacks and a PHONES jack. The types of signal that are output from these jacks will change as follows, depending on the state of the AW4416. 1 Initial state The signal of the stereo output channel will be output without change from the MONITOR OUT jacks/PHONES jack. B When the [SOLO] key is on The signal of the channel selected by the [ON] key will be sent to the SOLO bus, and output from the MONITOR OUT jacks/PHONES jack. At this time, all other signals will be muted. C When the TRACK [CUE] key is on The direct output signal of the track selected by the [REC TRACK SELECT] key will be output from the MONITOR OUT jacks/PHONES jack. D When the internal metronome function is on The metronome signal will be mixed with the output signals of 1-3. Tip! • The same signal is always sent from the MONITOR OUT jacks and the PHONES jack. However, the level adjustment is independent; the output level of the MONITOR OUT jacks is adjusted by the [MONITOR OUT] control, and the output level of the PHONES jack is adjusted by the [PHONES] control. • Whenever the [SOLO] key and the TRACK [CUE] key are both on, only the TRACK [CUE] key will be valid. RECORDER DIRECT OUT 1 RECORDER DIRECT OUT 16 STEREO L STEREO R SOLO L SOLO R METRONOME PHONES PHONES MIXER SOLO Logic RECORDER TRACK CUE Logic DA ON ATT MONITOR MONITOR OUT L +4dB R 30 - Operation Guide