Yamaha AW4416 Owner's Manual - Page 141
Manual punch-in/out recording
View all Yamaha AW4416 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 141 highlights
Chapter7-Punch-in/out Manual punch-in/out recording 1. Locate the song to a location earlier than where you wish to punch-in. Tip! If you set a locate point such as a marker or the A/B point at this location, it will be convenient when you later check the recorded result or perform punch-in/out again. For details on setting a locate point, refer to page 114. 2. Press the [REC TRACK SELECT] key for the track that you wish to record. The [REC TRACK SELECT] key will blink, and the track will be in recordready mode. 3. Press the [PLAY] key. (If you are using a foot switch, press the foot switch.) The song will begin playing. 4. At the location where you wish to punch-in, hold down the [REC] key and press the [PLAY] key (or press the foot switch). The [REC] key will light, and recording will begin on the track you selected in step 2. 5. At the location where you wish to punch-out, press the [PLAY] key (or press the foot switch). The [REC] key will go dark, and you will return to normal playback mode. 6. To stop the song, press the [STOP] key (or press the foot switch). The song will stop. 7. To check the recorded result, locate to the location of step 1, and press the [PLAY] key. Tip! If you make a mistake during punch-in/out recording, stop the transport and press the [UNDO] key to cancel the previous recording and return the data to the state before recording. The following diagram shows the manual punch-in/out procedure. 1 2 3 16 Playback Record Playback REC TRACK SELECT 2 PLAY REC PLAY PLAY STOP Punch-in Punch-out 129 - Operation Guide