Yamaha AW4416 Owner's Manual - Page 28
Make sure that the power of the AW4416 is turned off. For safety
View all Yamaha AW4416 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
Before you begin Installation procedure Please carefully read the cautions for installing optional devices, given at the beginning of this manual. 1. Make sure that the power of the AW4416 is turned off. For safety's sake, disconnect the power cable from the AC outlet. 2. From the OPTION I/O slot located on the rear panel of the AW4416, remove the two screws that hold the cover in place. Please keep the cover and screws you removed in a safe place. 3. Slide the I/O card along the rails inside the slot until it clicks into place. 4. Tighten the two screws included with the I/O card to fasten the card securely. Please note that if the screws are loose, the card may not be grounded correctly. 14 - Operation Guide
Before you begin
14
— Operation Guide
Installation procedure
Please carefully read the cautions for installing optional devices, given at the
beginning of this manual.
1.
Make sure that the power of the AW4416 is turned off. For safety
’
s sake,
disconnect the power cable from the AC outlet.
2.
From the OPTION I/O slot located on the rear panel of the AW4416,
remove the two screws that hold the cover in place.
Please keep the cover and screws you removed in a safe place.
3.
Slide the I/O card along the rails inside the slot until it clicks into place.
4.
Tighten the two screws included with the I/O card to fasten the card
securely.
Please note that if the screws are loose, the card may not be grounded correctly.