Brother International PE-DESIGN Ver.5 Users Manual - English - Page 106
Step Pitch, Pattern Size
View all Brother International PE-DESIGN Ver.5 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 106 highlights
Contents Before Using Getting Started Design Center Direction Pull Compensation Type Specifies the type of sewing direction. Constant: Sews at a fixed angle. The angle is specified by the Angle setting. Variable: Varies the sewing direction according to the object being sewn. Angle Specifies the sewing angle. (If Variable is selected as the Type setting, this setting is not available.) Range: 0 - 179 degrees 90˚ 135˚ 45˚ Default: 45 degrees 179˚ 0˚ Lengthens the sewing region in the stitch pattern's sewing direction to prevent pattern shrinkage during sewing. Range:0 - 2 mm (0.00 - 0.08 inch) Default:0 mm (0.00 inch) Fill stitch only: Step Pitch Frequency Sets the pitch of the steps. Range: 1 - 10 mm (0.04 - 0.39 inch) Default: 4.0 mm (0.16 inch) Sets the spacial frequency steps. Range: 0 - 99% Default: 30% Step pitch 0% 30% Programmable fill stitch only: Pattern Pattern Size Offset Width Height Direction Value Pattern Direction Select a pattern for Programmable Fill Stitch. Click Select Pattern, and the Browse dialog opens. Select the folder containing the pas file you want to open. Scroll through the available stitch patterns and double-click the desired pattern or click OK to select the pattern. Sets the stitch pattern width. Range: 5 - 10 mm (0.20 - 0.39 inch) Default: 7.5 mm (0.30 inch) Sets the stitch pattern height. Range: 5 - 10 mm (0.20 - 0.39 inch) Default: 7.5 mm (0.30 inch) Sets the offset arrangement of the pattern, and sets the direction of offset as Row/Column. When the pattern's arrangement is offset, sets the amount of offset. Range: 0 - 99% Default: 0% Allows you to rotate the angle of the stitch patterns. Range: 0 - 359 degrees Default: 0 degrees Layout & Editing Programmable Stitch Creator Quick Reference Alphabetic Index 98