Brother International PE-DESIGN Ver.5 Users Manual - English - Page 197

Contents 3 In the Gray Balance dialog, click Next to display the Photo Stitch Parameters dialog similar to the one shown below. N Specify the settings for creating Photo Stitch data. N Click Previous to return to the previous dialog. N Click Next to apply the settings to the Photo Stitch data, and display the next dialog. N Click Cancel to close this dialog. Before Using Getting Started Design Center Layout & Editing Programmable Stitch Creator Sewing Option: Detail Run pitch Conversion Priority Specifies how detailed the created embroidery data will be. Selecting a setting closer to Fine creates more details in the data and increases the number of stitches. Sets the sewing pitch. The pattern is created with this setting value as the minimum length. Range: 2 - 10 mm (0.08 - 0.39 inch) Default: 3 mm (0.12 inch) Select what parameter is given priority when converting to embroidery data. Stitch Quality: Creates data while giving priority to the stitching quality. However, many jump stitches will result. Jump Stitch Reduction: Creates data while giving priority to reducing the number of jump stitches in order to reduce complications during embroidering. However, the stitching quality will be slightly reduced. Image Type: Photo/Cartoon If Photo is selected, the thread colors will be mixed together, which will result in a more natural look. If Cartoon is selected, the thread colors will not be mixed together, which will result in a more simply colored look. Select Photo for image data from a photograph, etc. Select Cartoon for image data from an illustration, etc. (If there are less than 16 colors in the image data, the default selection is Cartoon.) Use Color: Specifies the color of thread used to create the embroidery data. The default setting is the darkest color in the current thread chart. 189 Quick Reference Alphabetic Index