Epson 2200 Service Manual - Page 106

EPSON Stylus PHOTO 2100/2200 Revision B Print Quality State Phenomenon Detail Dot missing and mixed colors (Continued) [Phenomenon 3] In the CL sequence, ink is ejected to the Waste ink pads. (This means that the Pump unit and Cap unit operate properly.) However, Dot missing is not resolved in indefinite nozzles after CL has been executed several times. (Dot missing/mixed colors) Table 3-18. Print Quality Fault Check Points Faulty Part/ Part Name Cap unit Check Point 1. Check for damage around the Seal rubber on the Cap unit. Seal rubber [Phenomenon 4] In the CL sequence, ink is ejected to the Waste ink pads. However, drawing operation is not performed properly, resulting in mixture of colors. (Mixed colors) 2. Check that the Wiper part is mounted on the Cleaning lever correctly. Wiper part Remedy 1. Change the Cap unit for a new one. 2. Install the Wiper part correctly or change it for a new one. Cleaning lever Ink cartridge 1. Look at the remaining ink indication of the EPW3 to check for the 1. Change the Ink cartridge for a new one. ink remaining in the Ink cartridge. TROUBLESHOOTING Troubleshooting 106